A Turbine Flow meter is a device that measures volumetric flow rates using displacement. Its features include being low cost, easy to use, accurate, and highly accurate. This article outlines the benefits of Turbine flow meters. If you’re considering purchasing one of these meters, Here read on to learn more about its capabilities. This is a great tool for batching applications that need to accurately determine the volume of flow.
Turbine flow meters are used to measure volumetric flow rate
A turbine flow meter measures volumetric flow rate by detecting the amount of energy in a flowing fluid. The meter’s blades are angled to rapidly rotate, and they’re attached to a rod with bearings to allow the blades to spin smoothly. As the blades move, they induce varying reluctance in the magnetic flux, which enables the meter to detect the volumetric flow rate. Other types of sensors attach to the blades, including pressure sensors and magnets.
Turbine flow meters are commonly used to measure liquid volumes. Their accuracy is superior to mechanical flow meters and are ideal for liquid-to-gas applications. However, they are not appropriate for use with corrosive or abrasive media, and should only be used on clean, low-viscosity fluids. Turbine meters must be calibrated for the media being measured, since fluids containing large particulate matter, magnetic particles, or iron are likely to damage the turbine mechanism.
They are a displacement flow measuring device
There are many factors to consider when choosing a turbine flow meter. First, determine what type of flow you need to measure. You can calculate minimum and maximum flows by calculating the Reynolds number of the fluid and its density and viscosity at their maximum and minimum values. Next, decide on the location and size of the meter, which should be positioned on a straight pipe. It should also have a bypass line so that you can inspect it easily for leaks or damage.
A turbine flow meter has a rotor and angled blades which spin at a rate proportional to the velocity of the fluid being measured. Figure 49.9 illustrates a typical section through a turbine flow meter. A magnetic pick-up detects the number of revolutions and converts that information into the fluid flow rate. The resulting reading is the flow rate. When a turbine meter is used properly, it can accurately estimate the volumetric flow of petroleum products in pipelines with a diameter of 600 mm.
They are low cost, easy to use, reliable and highly accurate
In addition to their low cost, turbine flow meters are highly accurate and are suitable for a wide range of applications. They can handle corrosive and chemical fluids, and can withstand high pressure. Some models can be used with heat tracing to obtain the exact temperature of a fluid. Moreover, they can be easily calibrated and are easy to use. But perhaps the most important benefit of China Flow Meter is their high accuracy.
Turbine flow meters are used in various pipeline installations, including metering stations, chemical injection, and offloading to smaller pipelines. Turbine flow meter is ideal for gas mixing, OEM applications, and downhole mass dosing. These meters also have a high accuracy and temperature capability. They are not suitable for very low flow, but can handle a wide range of fluids.